MDO STL-IP IP Based Audio Codec
AudioTX STL-IP is an easy to use, cost-effective solution to audio delivery over IP networks. It is a new product that is absolutely unique in offering the same quality, robustness and low delay as conventional audio circuits, but with the flexibility and low cost associated with using IP connectivity.
AudioTX STL-IP provides the perfect solution for audio over IP - whether you need an IP based STL (Studio Transmitter Link), or to distribute shared programming over networks, connect studios, replace conventional permanent audio circuits or even for ad-hoc connectivity like Outside Broadcasts/Remotes. It works over existing private networks like LANs and WANs, Telco networks, Private leased lines like T1/E1, Wireless networks (both professional and WiFi), Satellite and even the Internet.
Professional balanced audio connections and AES/EBU digital inputs and outputs are provided on XLR connectors and, where required, the system can accept an external wordclock signal, or sync to an external digital signal. AudioTX STL-IP also allows for the transmission of ancillary serial data and/or contact closures (GPIO) alongside and in perfect sync with your audio.
Each unit can simultaneously transmit your audio to up to 6 different 'connections' and receive audio from one location. Each 'connection' can be independently set to use TCP/IP, UDP or UDP Multicast networking - sending audio to an unlimited number of receiving units. Mono or Stereo audio can be sent in Linear (uncompressed) mode at up to 24bit, 96kHz, or using MPEG Layer 2 and MPEG Layer 3 coding, J.41 or ADPCM modes. Plus AAC, AAC Low-Delay and HE-AAC v2 (AACPlus) with the optional AAC Coding Pack which allows you to send Stereo audio from just 14kbps! The AAC option can be ordered at a later time, if you already have the unit - just select the AAC software option.
Switchable FEC (forward error correction) and adjustable network jitter buffers allow the system to function perfectly even on busy and difficult network connections
AudioTX STL-IP is configured via a standard web-browser on the network - settings can of course be password protected. Once configured, your connections will be maintained... in the case of network failure or power loss, the system will reconnect when network connectivity or power returns.
Highlights
*Send and receive broadcast quality audio over IP networks.
*LAN/WAN, Internet, Telco/carrier T1, E1, ATM circuits, Satellite, and other wireless networks.
Linear, J.41, ADPCM, MPEG Layers 2 and 3 coding.
*Ancillary serial data and closing contacts (GPIO).
*One to many mode (multicast).
*Selectable Forward Error Correction (FEC)
AudioTX STL-IP is an easy to use, cost-effective solution to audio delivery over IP networks. It is a new product that is absolutely unique in offering the same quality, robustness and low delay as conventional audio circuits, but with the flexibility and low cost associated with using IP connectivity.
AudioTX STL-IP provides the perfect solution for audio over IP - whether you need an IP based STL (Studio Transmitter Link), or to distribute shared programming over networks, connect studios, replace conventional permanent audio circuits or even for ad-hoc connectivity like Outside Broadcasts/Remotes. It works over existing private networks like LANs and WANs, Telco networks, Private leased lines like T1/E1, Wireless networks (both professional and WiFi), Satellite and even the Internet.
Professional balanced audio connections and AES/EBU digital inputs and outputs are provided on XLR connectors and, where required, the system can accept an external wordclock signal, or sync to an external digital signal. AudioTX STL-IP also allows for the transmission of ancillary serial data and/or contact closures (GPIO) alongside and in perfect sync with your audio.
Each unit can simultaneously transmit your audio to up to 6 different 'connections' and receive audio from one location. Each 'connection' can be independently set to use TCP/IP, UDP or UDP Multicast networking - sending audio to an unlimited number of receiving units. Mono or Stereo audio can be sent in Linear (uncompressed) mode at up to 24bit, 96kHz, or using MPEG Layer 2 and MPEG Layer 3 coding, J.41 or ADPCM modes. Plus AAC, AAC Low-Delay and HE-AAC v2 (AACPlus) with the optional AAC Coding Pack which allows you to send Stereo audio from just 14kbps! The AAC option can be ordered at a later time, if you already have the unit - just select the AAC software option.
Switchable FEC (forward error correction) and adjustable network jitter buffers allow the system to function perfectly even on busy and difficult network connections
AudioTX STL-IP is configured via a standard web-browser on the network - settings can of course be password protected. Once configured, your connections will be maintained... in the case of network failure or power loss, the system will reconnect when network connectivity or power returns.
Highlights
*Send and receive broadcast quality audio over IP networks.
*LAN/WAN, Internet, Telco/carrier T1, E1, ATM circuits, Satellite, and other wireless networks.
Linear, J.41, ADPCM, MPEG Layers 2 and 3 coding.
*Ancillary serial data and closing contacts (GPIO).
*One to many mode (multicast).
*Selectable Forward Error Correction (FEC)
| Weight (kg) | 4.0000 |
| Manufacturer | MDO |
| Inputs | Analog Inputs : XLR <br/> Digital Audio Input :Format AES/EBU and SPDIF, XLR <br/> TTL I/O 4 inputs, 4 outputs plus 4 additional status output signals <br/> Wordclock Internal, or external BNC input <br/> |
| Outputs | Analog Outputs XLR <br/> TTL I/O 4 inputs, 4 outputs plus 4 additional status output signals |
| Audio Formats | Linear audio / MPEG2 / MPEG3 / J41 /ADPCM / Optional AAC(+) |
| User Interface | Web-browser control interface |
| Overall | Max input level +18dB, XLR GPIO Connectors D-Sub 25 pin connector Ancillary Data Channel RS-232 up to 57600bps ON D-Sub 9 pin connector Network 10/100 Ethernet Neutrik Ethercon RJ45 connector Transport Linear audio Mono or Stereo full-bandwidth audio to 24 bit. 5ms delay. MPEG Layer 2 Mono audio from 64kbps, stereo at 128kbps to 384kbps. 45ms delay. MPEG Layer 3 Mono audio from 64kbps, stereo at 128kbps to 384kbps. 125ms delay. J.41 32kHz sample rate, Mono audio at 384kbps, Stereo at 768kbps. 5ms delay ADPCM Mono audio at 128kbps or 192kbps, Stereo at 256kbps or 384kbps. 5ms delay. Other Power 96-264 VAC, 50-60Hz universal input. |
| NET/LAN | Neutrik Ethercon RJ45 connector |
| RS232 | up to 57600bps ON D-Sub 9 pin connector |
| Size | 1 HE |
| Power Supply | 110V -240V |
Loading... 